Voicemail Distribution Work-Around

This article explains the work-arounds for establishing a shared voicemail box. At this time, voicemail extensions follow a single user, but there are ways to allow multiple users to access the same voicemail box. These solutions would be particularly helpful when creating a call queue/ring group such as when the final destination for "when unanswered" is a voicemail extension and all of the Ring Group users need to read or hear those messages.

Voicemail Distribution Group Solutions

Configure a Phone Line (MWI)

This option configures users' devices to have a MWI (message waiting indicator) button on their device for a shared voicemail box. This is slightly different than configuring a shared line appearance. A call will not ring into each of the devices for multiple users to answer. Instead, this solution is to allow multiple devices to access one "shared" voicemail box after the caller has left a message.

1. The first step is to configure a single user with multiple device lines. Either select a current user and skip to step #2, or create a new user and continue with this first step. 

This is the main user who will own the voicemail extension and will be the only user in this set-up who can view these voicemails from their portal. 

All other users who are given access to this extension will only be able to hear the messages from their devices and not from their own portal log-ins. It is similar to monitoring another user's line. 

For this example, create a user with the name "Shared Voicemail". Issue them a new extension ("300"). Emergency address is required. Use your company's location and validate it.

Then click Add User. 

2. Next edit the user. Click on Phones. Then click Add Phone. 

3. Now "add a phone" for each user that needs access to this user's voicemail box. This user, "Shared Voicemail" was issued extension 300. If four employees need to monitor x300's voicemails, then add three different phones here, one at a time: 300a, 300b, 300c. Then there will be a total of four phones attached to this user: 300, 300a, 300b, 300c. 

4. Continue adding phones to match the number of users who need access to this user's voicemail. 

5.Navigate to the Inventory screen and click on Phone Hardware. 

6. Across from a device's MAC address click "edit". 

3. Scroll to the bottom of the screen and edit Unified Messaging with one of the below selections. Click Save when done and the email addresses added in the first step will now be emailed with the audio and/or transcription when a voicemail is left on the "Shared Voicemail" user's extension (x400). 

Info

Using this example, only the "Shared Voicemail" user will be able to access voicemails left on x400 from their portal, in UC Softphone and UC webphone. They are the owner of these voicemails. Sending voicemails to additional email addresses does not make the recipient the owner of the voicemail, and they will not be able to view them from their own portal.

Email Notification: The following options are available when sending a voicemail email notification. 

• send with hyperlink or send with brief hyperlink (this will not include transcription)
• send with attachment (choose to leave as new, move to save, or move to trash in the owner's voicemail box after it has been sent)
• send with brief attachment (choose to leave as new, move to save, or move to trash in the owner's voicemail box after it has been sent)