Disabling Grandstream HT802 Stutter Tone
Disabling Grandstream HT802 Stutter Tone
The Grandstream HT802 device has a feature to play the stutter tone once the SIP server has a voicemail waiting for the extension it is programmed to. This KB describes brief information on how to disable the stutter tone feature while provisioned to UnitedCloud.
1. The stutter tone will always play every time the phone is picked up as long as there's an existing voicemail.
2. Clearing the voicemail and making sure no remaining messages exist will stop the stutter tone from playing.
3. To check and manage voicemail from the analog phone, dial 5001 + VM PIN.
4.To disable the stutter tone completely, the voicemail service has to be disabled from the profile.
1. The stutter tone will always play every time the phone is picked up as long as there's an existing voicemail.
2. Clearing the voicemail and making sure no remaining messages exist will stop the stutter tone from playing.
3. To check and manage voicemail from the analog phone, dial 5001 + VM PIN.
4.To disable the stutter tone completely, the voicemail service has to be disabled from the profile.
Related Articles
Grandstream HT81x Setup
Prerequisites Access to the HT81x webgui Office Manager or higher user scope Manual device credentials found here SIP Trunk credentials will require a partner account or support to assist. This KB will go over how to setup basic functionality of the ...Manually configuring a grandstream device
You will need to get access to the phone's web GUI, this is done by navigating to the IP address of the phone on a computer that is connected to the same network as the phone. Once at the web GUI you will need to log in with either the ...Grandstream GXW410X PSTN Gateway Setup
Prerequisites Reseller or Higher scope Access to create a SIP Trunk GXW410x with Firmware version 1.4.1.5 Device can not be added like a normal device, support will need to manually add the device. Account Setup The Gateway requires a SIP Trunk ...Grandstream P-Codes
Grandstream P-Codes P-Code Retrieval One of the most common ways to generate a P-Code Template is to configure the phone using the WebUI and exporting the phones configuration, which can be found under Maintenance > Upgrade and provisioning. If you ...Grandstream GDS3710 Setup
Prerequisites Access to the GDS3710 webgui Office Manager or higher user scope Manual device credentials found here This KB will go over how to setup basic functionality of the Grandstream GDS3710 video door system. Please use extension range ...