Set Algo Multicast Device to be a Receiver

Set Algo Multicast Device to be a Receiver

Prerequisites

  1. Access to the Algo's Web GUI. 

Algo Setup

  1. log into the Algo device and set the main multicast settings to be Slave/Receiver. This is found under Basic Settings -> Multicast. 


  2. Disabled the RTCP settings found under Advanced Settings -> Advanced Multicast. 



    • Related Articles

    • Bria Desktop (Counterpath) Setup

      Get started with your Bria Desktop softphone app Prerequisites If you have not already created a manual device on the Manager Portal. Either a Solo or Teams account setup at counterpath.com Manual device credentials from this KB ...
    • Registering an Algo 8301 to a paging user extension

      Register Period (seconds)Prerequisites Active internet connection laptop/desktop connected to the network which the device is connected Portal configuration Create a User in extension 5800 Navigate to new user Navigate to the "Phones" tab Click ...
    • Setup Manual or Softphone Device

      Unsupported phones and many unified communication softphones require manual configuration. The article below covers how to set up an account in the portal to be entered into the devices configuration.  All Manually setup devices need to have their ...
    • Site Manager - Device Defaults

      Prerequisites: Site Manager or higher user scope Portal Access Access to the users sites. Accessing the Sites Defaults To add a device default to your site you will need to be logged into your domain.  1. Navigate to Users -> Sites. Here you will see ...
    • Set Up Provisioning Without Zero Touch

      If the zero-touch server isn't automatically bringing the phone over to the new server, or if you are having issues, sometimes you will need to enter the provisioning server manually to provision the phone. The location of this is different entry ...