Netgear FVG318

Netgear FVG318

Current Status

Compatible after Changes

Suggestions

Update firmware and disable SIP ALG

Comments

This router appears to work with VoIP services with the SIP ALG setting is disabled. The router does not work properly with VoIP with the SIP ALG setting enabled (which is enabled by default). You should make sure you have the most recent firmware for this router before using it. To disable the SIP ALG, first login to your router and select ‘Rules’ from the left hand side menu. Next, check the box that says ‘Disable SIP ALG’.

 

**All routers and firewalls need to have the correct ports forwarded and Whitelisting configured for VOIP service, please click here for more information.

    • Related Articles

    • Netgear WRN2000

      Current Status Not Supported Suggestions Replace Device Comments This router lacks the ability to disable SIP ALG and is not compatible with VoIP services.   **All routers and firewalls need to have the correct ports forwarded and Whitelisting ...
    • Netgear WGT624

      Current Status Not Supported Suggestions Replace Device Comments This router lacks the ability to disable SIP ALG and is not compatible with VoIP services.   **All routers and firewalls need to have the correct ports forwarded and Whitelisting ...
    • Netgear WGR614

      Current Status Not Supported Suggestions Replace Device Comments This router lacks the ability to disable SIP ALG and is not compatible with VoIP services.   **All routers and firewalls need to have the correct ports forwarded and Whitelisting ...
    • Netgear FVS318

      Current Status Compatible after Changes. (Firmware V 3.0.7-34 and up) Suggestions Disable SIP ALG Comments Disable the SIP ALG under "Security">"Firewall">"Advanced".   **All routers and firewalls need to have the correct ports forwarded and ...
    • Router Compatibility List

      This list is under continual development. If you have any information to add in this article with regards to compatibility or updates to compatibility, please email any details or test results and configurations to support for review. Model Status ...